The Complete Guide To Mounting A Rifle Scope Argalioutdoors Set the scope in the middle of its magnification setting. carefully remove your rifle from the gun vice and shoulder your rifle like you would when you are shooting. move the scope all the way forward to the rings. slowly move the scope back until you can see the entire field of view of the scope. That said, there’s no time like the present to learn how so let’s jump right into it. 1. get the right rings and base. image credit: solidmaks, shutterstock. think of your set up as four different components: the rifle, the scope, the rings, and the base. the base mounts to the rifle, the rings mount to the base, and the scope rests inside.
The Complete Guide To Mounting A Rifle Scope Argalioutdoors Argalioutdoors (208) 918 0246; the complete guide to mounting a rifle scope. a backcountry hunters layering guide–part 1 the basics. Move the riflescope fore and aft in the mounts until that is achieved. step 4. place your rifle into your vise or secure work surface, and finding a flat spot on the scope, such as the base, place a level atop it and level out. step 5. consider removing your turret cap. this will allow you to level as close to the turret adjustment screw as. Jerry miculek breaks down a complete step by step process for everything you need to know when mounting a riflescope to an ar 15. connect with vortex optics:. Step 3: attach the bases. then, use your torque wrench or socket head to attach the bases and rings to your rifle. unless your manufacturer advises against it, use your semi permanent loctite to attach the screws even more securely. to make sure your bases attach evenly, tighten the screws alternately. if you are using rings attaching to the.
Comments are closed.