My Little Guy Snapped Off The Headphone Aux In The Xbox Controller Any

My Little Guy Snapped Off The Headphone Aux In The Xbox Controller Any Look up a tutorial on . pretty easy though there are 5 total small screws, two at the bottom of the handle parts two near the top and one behind where you put batteries in (it will be covered with a sticker of a sorts) simply take them all out and remove the top layer of the controller off. Remove the rear controller shell. remove the two rear screws above the vibration motors, using a t6 torx screwdriver. separate the rear board from the top board. work the boards apart from the.

Why Is My Xbox One Controller Headphone Jack Not Working The xbox one white controller headphone jack does not have a hole in the back. take the covers off the controller (many online instructions), two torx screws hold the two boards together, loosen both. separate the boards about 1 8 inch, and the headphone jack will fall out intact. tape the jack to a table, drill a 1 16 inch hole in the back. Over a year ago after a system update, both of my xbox controllers’ headphone jack stopped working. before the update both were functional. got the update and they stopped working. when you go into the settings and config of the controller you can’t select the volume option. when you go to the chat the mic is stricked out, muted. Disconnect the headset from the controller, then reconnect it firmly. the number one cause of xbox one headsets malfunctioning is a poor connection between the headset and controller. unplugging the connector, then firmly plugging it back in, often takes care of the problem. check your privacy settings. If you found that your headset worked with a different controller, try updating the firmware of the original controller. navigate to profile & system > settings > devices & connections > accessories. select the controller to update. select the three dot menu. if a firmware update is available, install it. check your privacy settings.