Kinetico 51 Won T Draw Brine Part 1 Youtube Replaced brine control flow, venturi throat, backwash flow control, regeneration flow control.note: initially i thought system was fixed, but suction is stil. Unit produced in '98. have had no issue in last 8 years. #2 wheel, double tank system. i have checked float valve assembly, brine elbow, venturi, venturi throat, stem values, and brine float control. everything looks good, nice circle of light and can blow air though with one exception. i think.
Kinetico 51 Won T Draw Brine Part 2 Youtube Kinetico that won't draw brine in during regeneration mode.link to control value disassembly: watch?v=lzgchlo9dzw. Video demonstration of part 2's failure to fix issue.main value stems replaced. just about all seals replaced in control unit now.link to control value disa. Oct 14, 2021. #1. discovered water wasn't soft. here's what i've done. disconnected brine tube from tank float, it is pulling vacuum. stuck tube in cup of water, draws fine. replaced the air check valve tube part on the float valve assembly, thinking that the check ball was stuck. while doing that, discovered that there was a lot of salt mush. 2.7 addressing malfunctioning brine or float valves. 2.8 dealing with a brine line with a hole. 3 steps to troubleshoot a kinetico water softener. 3.1 step 1: checking the water softener settings. 3.2 step 2: inspecting the salt levels. 3.3 step 3: checking for blockages in the system.
Comments are closed.