Easy How To Sew A True Flat Felled Seam Sewing Tutorial 3 Versions Take two pieces of cloth, and place them wrong sides together, pinning to secure. place the fabric pieces under the sewing machine foot, and sew with your chosen amount of seam allowance. press the seam with an iron and press cloth if needed. open the seam, and press both seam allowance sections in the same direction. This step by step tutorial will show you how to sew a flat felled seam on a sewing machine, without needing a specialist presser foot. flat felled seams are.
A Guide To Seam Finishes Melly Sews To begin sewing a flat felled seam, place the wrong sides of the fabric together. then, sew the seam on the right side of the fabric. this is unlike a standard seam, which is sewn on the wrong side of the fabric. every step for a flat felled seam will be seen from the right side. thoroughly press the seam the same way it was sewn to set the. Now sew the seam normally, using a 5 8″ allowance, unless your pattern specifies otherwise. trim one side of seam allowance. take your shears, and trim one side of the seam allowance, so that it’s half the width of the other seam allowance. fold and press the wider seam allowance. fold the wider seam allowance over the narrower one and press. The flat felled seam is a flat, comfortable seam suitable for medium weight fabrics and garments requiring maximum durability. to create a flat felled seam, first sew your fabric pieces together, then trim one seam allowance down to half its width. fold the wider seam allowance over the trimmed one, and stitch close to the folded edge. Press the seam flat and carefully trim one seam allowance down to 1 4″. this will become the bottom seam allownance. fold and press the other top seam allowance raw edge 1 4 inch toward the seam on the wrong side. wrap. wrap the folded seam allowance around the trimmed raw edge of the shorter seam allowance.
Comments are closed.