How To Mount A Scope In 7 Easy Steps The Weapon Blog If your scope is flat bottomed, then using a scope leveling tool, put the base of the tool on the rail and use one of the wedges to alter the flat bottom of the scope to the rail. if your scope is round bottomed, you can either use a series of levels to level it or place a level o n the top scope cap and eye it. step 7: secure the rings. Below are the 7 easy steps to mounting a rifle scope: gather the right tools. select the correct rings and base. mount the base to your rifle. attach scope rings to base. adjust scope position to fit you. level your rifle scope. secure scope within rings. with that, let’s jump in to each step to mounting a scope on a rifle.
Mount A Rifle Scope Yourself In 7 Easy Steps Outdoor Life Align reticle erik rank. with the bottom half of the rings in place, position the scope and tighten the top halves of the rings only enough to allow the scope to rotate and move back and forth. with the rifle held level, rotate the scope until the reticle is precisely vertical and horizontal. adjust eye relief erik rank. That said, there’s no time like the present to learn how so let’s jump right into it. 1. get the right rings and base. think of your set up as four different components: the rifle, the scope, the rings, and the base. the base mounts to the rifle, the rings mount to the base, and the scope rests inside the rings. How to mount a scope on a rifle: adjust eye relief. now, lay scope in the rings, replace the top half of the rings, and lightly tighten screws. take the rifle out of the cradle or vice and hold the rifle as you naturally would when aiming at a target. move the scope forwards or backwards as necessary to adjust eye relief. Loosely mount the rings on the base, tighten screws just enough to hold everything in place. remove the top halves of the rings (we recommend keeping them in sets). place your scope in the bottom halves of the rings. replace the top halves of the rings and loosely tighten the screws – again, snug enough to hold everything in place for right now.
Mount A Rifle Scope Yourself In 7 Easy Steps How to mount a scope on a rifle: adjust eye relief. now, lay scope in the rings, replace the top half of the rings, and lightly tighten screws. take the rifle out of the cradle or vice and hold the rifle as you naturally would when aiming at a target. move the scope forwards or backwards as necessary to adjust eye relief. Loosely mount the rings on the base, tighten screws just enough to hold everything in place. remove the top halves of the rings (we recommend keeping them in sets). place your scope in the bottom halves of the rings. replace the top halves of the rings and loosely tighten the screws – again, snug enough to hold everything in place for right now. Loosen the bottom portion of your scope rings and seat them in the slots of the scope base. various types of screws are used to mount rings to bases. be sure to use the appropriate bit. (photo: arkansas online) use the recommended torque value to secure the scope rings to the base. Move the riflescope fore and aft in the mounts until that is achieved. step 4. place your rifle into your vise or secure work surface, and finding a flat spot on the scope, such as the base, place a level atop it and level out. step 5. consider removing your turret cap. this will allow you to level as close to the turret adjustment screw as.
Comments are closed.