How To Install A Lock Up Kit 700r4 Curt S Corner At Mon Monster transmission presents curt's corner as curt goes over on how to install a lockup kit on a 700r4 transmission.items included:oil pressure switch with. Monster transmission presents curt's corner as curt goes over on how to install a lockup kit on a 700r4 transmission. items included: oil pressure switch with 2 spade connectors. 2 brass fittings. about 20' of electrical wire. 5 spade connectors. 2 for the oil pressure switch and 3 for the toggle switch.
How To Install A 700r4 Lockup Kit At Deborah Harrison Blog Monster transmission presents curt's corner as curt goes over on how to install a lockup kit on a 700r4 transmission. this kit will enable the driver to control the operation of the torque converter lock up. the switch will allow driver to turn the lock up function off during in town driving and on during high speed highway driving. Lock up plug fig. 2 oil pressure switch in the 4th gear port. introduction there is no need to drop the pan as everything is installed externally, but you must have a working factory lock up harness and solenoid for the kit to operate. the kit functions by monitoring fourth gear oil pressure at an external oil pressure port. external wiring. Curt is back in his corner with monster transmission lock up kits.stay tuned as he shows what is included in each kit and which one is right for you. curt re. Part 1. how to install a torque converter part 2. monster transmission presents curt's corner and how to properly install a torque converter. part 2. how to exchange ford aod, aode, 4r70w transmission linkage. how to exchange the lever arms for the detent or tv cable rod for the ford aod, aode and 4r70w transmissions.
Comments are closed.