How To Fix Anything With A Scratchy Volume Control Youtube In this video, we use the deoxit d5 product to clean a dirty potentiometer in a volume nob that has been exhibiting a scratchy sound when adjusting the volum. How to clean repair or fix scratchy, noisy volume control knob or tone control potentiometer pots. typical do it yourself diy video guide. just do it youself.
How To Repair Scratchy Noise Volume Control Or Tone Control S Youtu Volume controls, tone controls, etc, can get dirty and gunked up over time. they can develop oxidation. this leads the static noise and you turn the dials on. Pots should be worked back and forth with neutral pressure on the shaft, then repeat with a gentle pulling on the shaft, then repeat by gently pushing on the shaft. repeat the back forth up down in out activity each day for a few cycles until the noise is gone. paul. 1) ‘dirt and corrosion are interrupting the contacts on the pot – spray some contact cleaner on the offending parts.’. 2) ‘not all dirt and corrosion is fixable with contact cleaner. if you have a scratchy volume control, it may be best to replace it. pots are cheap and the replacement job is a pretty easy one.’. Step 5. spray the top and bottom of the potentiometer with an electrical contact cleaner. apply a few short bursts on each side, then spin knob back and forth all the way a few times. spray both sides again, then spin the knob again. this will help spread the cleaner around and dissolve the gunk.
Comments are closed.