How To Draw Graphic Scale Ferisgraphics These short videos are intended to instruct folks on one way of using analog skills to communicate architecture. 12 13 2018 11:58 am. choose tool palette from the ribbon, manage tab or type toolpalette at the command line. once the tool palette is open, select the annotation palette and click on the graphic scale icon and place in your drawing. you can also try looking in c:\program files\autodesk\autocad 2010\sample\en us\dynamic blocks folder.
How To Draw Graphic Scale Ferisgraphics As mentioned above, a scale bar is a graphical representation of distance on a map or drawing. it is typically a horizontal line marked with distances in real world units, such as kilometers or miles for maps, or meters and feet for architectural drawings. the scale bar is divided into segments that represent specific units of measurement. The three types of map scales commonly used are: 1. written or verbal scale: it represents the scale as a ratio, such as 1 inch equals 1 mile. 2. graphic scale: it uses a line or bar divided into parts, with each part representing a specific distance on the ground. 3. The scale bar is a key component of scale drawings as it helps provide an understanding of distances depicted on the drawing. these scale bars show what one unit represents at different scales. scale bars will typically start at 0 m (or 0 cm, 0 km etc). however, in some cases they may start at a different value. 1" = 30' 0" has a scale factor of 360 1 2" = 1' 0" has a scale factor of 24 the drawing must get (way) larger, so 360 divided by 24 = 15x or 1500%. scale conversion calculator. below, you will find a simple calculator to help with this calculation. simply select the scale of your original drawing and select the scale you would like the drawing.
Comments are closed.