How To Connect A Car Stereo For House Use With A Psu 11 Steps 2. now twist yellow and red wires together. 3. connect both yellow and red wires to the psu (yellow!) wire. [3] 4. connect black wire with black on psu. 5. leave switch off and plug power supply in outlet. This video shows how to connect your car audio video unit in to home audio unit using computer atx power supply.all you need:1) any head unit (car stereo un.
How To Connect A Car Stereo For House Use With A Psu 11 Steps Step 4: stereo and psu meet at last. this is where the stereo and power supply meet at last. find one of the four pin connectors, with the yellow, black and red wires on it. you need a yellow and black wire next to each other. the black ground on your stereo goes to the black wire on the connector. the red and yellow on the stereo go to the. Link to the power supply used!amazon: amzn.to 3d22vedsolder seal connectorsamazon: amzn.to 3d0evxqring terminalsamazon: amzn.to 3djxc. On the car stereo, twist the red and yellow wires together. after you do that, connect the black ground wire on the stereo to the black wire on the pin connector. the stereo's red and yellow wires connect to the connector's yellow wire. you then follow the typical instructions to hook the stereo up to your speakers. video of the day. To connect a car radio to a power supply you’ll need to do the following: ground: connect the radio’s ground wire (black wire) to the ( ) power supply output. main power: connect the radio’s 12v battery wire (usually the yellow wire) to the ( ) power supply output.
Comments are closed.