How To Change A Tire Flat Tire Changing Tools Carhop Place the jack under the car. engage the jack until the tire you’re changing is about half a foot off the ground. unscrew the lug nuts the rest of the way and remove them. take the tire off the hub. align the replacement or spare tire with the open lug bolts. tighten the lug nuts by hand. put the jack down until the replacement tire is on the. 1. use an air compressor or can of fix a flat to first get some air into the tire. with an air compressor: screw the gauge onto the valve stem, plug the lighter adaptor into the car, turn the pressure on, and pump it up to the correct air pressure for your tire. with fix a flat: please be aware that, if you use a can of compressed air like fix.
How To Change A Flat Tire Jump to: step 1: park your car. step 2: find the tire changing tools your car came with. step 3: jack it up. step 4: remove the lug nuts. step 5: put the spare tire on. Then use your lug wrench to fully remove the nuts. after that, pop off the wheel, then slap the spare tire on, placing the wheel with the flat next to the jack where the spare used to be; safety. Turn the wrench a quarter or half turn counterclockwise to loosen the lug nuts. by starting to loosen the lug nuts before you jack up your car, the car's weight will hold the wheel stable so you aren't inadvertently moving the tire instead of loosening the lug nuts. 5. place the jack under the vehicle and raise it. 5. remove the flat tire. with the car raised, finish loosening the lug nuts and place them in a convenient spot nearby. (think somewhere where they won't get in the way but where they won't get.
Comments are closed.