How To Build A Billy Bookcase At Mark Ives Blog Step one: first, i built a base for my bookcases. a base elevates the shelves from the floor, and gives the entire piece a feeling of substance. the base is built out of a 2×4 frame, with interior studs to support the plywood top of the base. step two: cut a piece of plywood to cover the top of the 2×4 base frame. In this video i'll show you how to build an ikea billy bookcase. it is estimated that every five seconds, one billy bookcase is sold somewhere in the world.
How To Build A Billy Bookcase At Mark Ives Blog The classic 'billy' bookcase is in millions of homes but does suffer from a problem that can be fixed without too much cost and effort if you know how.🧰 t. There are two little jutting out areas on each side, creating a perfect nook for bookshelves to wedge into, wall to wall (or jut out to jut out). the only problem? the space was about two inches too small to fit 6 of the ikea shelves perfectly – the 6 that would create that wall to wall, built in look. Fill in the empty groove where the backing would go with caulk. nail a small 1 2" dowel to the back of the bottom shelf of each bookcase. paint the wall where the bookcases will be installed, the same color as the bookcases. move the bookcases into position flush together. Here’s the supply list for the built in bookcase hack: (2) billy bookcases. (4) 15 3 4″ oxberg doors. crown molding. (2) 2x4s. (2) 1x2s. wood screws. for this project, we first built the billy bookshelves according to the ikea instructions. the bookshelves come with a curve to accommodate baseboards so the built in bookshelves can fit flush.
Comments are closed.