Brine Draw Issues What To Check On Autotrol Model 155 Youtube This video goes over things to check if you are having brine draw issues with your autotrol 155 valve.visit us on our website at : softenerparts . Video explaining the operation and troubleshooting process of the autotrol 255 control valvevisit us on our website at : softenerparts.
Common Issues Brine Draw 2 Youtube This video goes over the function and removal of the brine refill control for the autotrol 155.visit us on our website at : softenerparts. If an autotrol model 155 or newer model 255 ( since 1995 ) is not drawing the salt water out of the brine tank, what should i check? 1. make sure all the fittings are tight. the connections at the valve head ( air check male and female connections ) and at in the brine tank ( 2 nuts of elbow to brine pick up tube ). also check the tubing. We inherited an autotrol 255 760 on a wg 1040 resin tank with the purchase of this home in 2011, and it was exhibiting brine tank overflows with each cycle at the time we moved it. i replumbed the whole house at the time, but kept this system, as i found it worked fine after re plumbing the. If the injector is clear make sure that the hole that it sets in is clear. also could be that the flappers for the brine might not be sealing or opening correctly. water softeners and air filtration systems softener wont draw brine i have an autotrol 155 and its not drawing brine. removed the injector and filter which was plugged of rust.
Common Issues Brine Draw 2 Youtube We inherited an autotrol 255 760 on a wg 1040 resin tank with the purchase of this home in 2011, and it was exhibiting brine tank overflows with each cycle at the time we moved it. i replumbed the whole house at the time, but kept this system, as i found it worked fine after re plumbing the. If the injector is clear make sure that the hole that it sets in is clear. also could be that the flappers for the brine might not be sealing or opening correctly. water softeners and air filtration systems softener wont draw brine i have an autotrol 155 and its not drawing brine. removed the injector and filter which was plugged of rust. For older 36f air check ( used on most 155 models ), it would be this male x compression fitting, 1 4 male x 3 8 compression. and for newer style air check ( used on all 255 models and late model 155 and all technetic 1000 valves ), the fitting is 1 4" female x 3 8" compression nut. ( since most systems use 3 8" o.d. brine tubing ). Video explaining the operation and maintenance process of the autotrol series 155 control valvefor all your water softener needs visit us at : softenerpa.
Comments are closed.